Monobloc air-to-water heat pump HPA-O 6 CS Plus Flex Set (6kW) Stiebel Eltron
Monobloc air-to-water heat pump HPA-O 6 CS Plus Flex Set (6kW) Stiebel Eltron - Image 2
Monobloc air-to-water heat pump HPA-O 6 CS Plus Flex Set (6kW) Stiebel Eltron - Image 3

Monobloc air-to-water heat pump HPA-O 6 CS Plus Flex Set (6kW) Stiebel Eltron

Product code: 239053

8 707,00€

ESTO 3
ESTO järelmaks

Advantages of a monobloc air-to-water heat pump:

  • Heat transfer takes place in the outdoor unit
  • The unit is in a hermetically sealed system
  • During installation, only water pipes need to be connected
  • Monobloc air-to-water heat pumps operate significantly more quietly than Split-type units
  • The evaporators of monobloc units are significantly more massive, and therefore they operate much more efficiently than Split-type air-to-water heat pumps under the same conditions.
  • Inverter technology enables ideally matched heating output through a variable-speed compressor
  • Thanks to the compact outdoor module with various indoor modules, the installation space requirement is smaller
  • Quiet operation thanks to the encapsulated refrigerant circuit and infinitely matched fan speed
  • Compressor freezing and condensate drain clogging are prevented by “Anti-blocking condensate” (ABC design)
  • Can be controlled via smartphone
  • Simple hydraulic connection thanks to integrated anti-vibration mounts

More information about the product’s technical specifications, installation diagrams, etc. can be found here.

SKU: 239053 Categories: , , Tag:

Description

Comfort features

Quiet operation thanks to the encapsulated refrigerant circuit and acoustically insulated compressor. Integrated heat and electricity metering via refrigerant circuit data.

Total efficiency

Inverter waste heat raises the return temperature, which together with demand-dependent reversing of the defrost circuit significantly increases the overall efficiency of the system.

Efficiency

Inverter waste heat raises the return temperature, which together with demand-dependent reversing of the defrost circuit significantly increases the overall efficiency of the system.

Installation

Thanks to integrated anti-vibration mounts, the heat pump can be connected directly to the heating system. Extensive accessories are available for both floor-mounted and wall-mounted installations. This ensures easy condensate drainage. The electrical connection panel is easily accessible without opening the unit.

Monobloc air-to-water heat pump HPA-O 6 CS Plus Flex Set (6kW) Stiebel Eltron Kütteseadmed Sanitaartehnika Soojuspumbad Puidukatlad Korstnad Radiaatorid Boilerid Torud Tarvikud

Monobloc air-to-water heat pump HPA-O 6 CS Plus Flex Set (6kW) Stiebel Eltron Kütteseadmed Sanitaartehnika Soojuspumbad Puidukatlad Korstnad Radiaatorid Boilerid Torud Tarvikud

Monobloc air-to-water heat pump HPA-O 6 CS Plus Flex Set (6kW) Stiebel Eltron Kütteseadmed Sanitaartehnika Soojuspumbad Puidukatlad Korstnad Radiaatorid Boilerid Torud Tarvikud

General
Manufacturer STIEBEL ELTRON
Maksimaalne töö amperaaž (A)/ peale- ja tagasivoolu ühendused (mm) 20/ 28
Energiaklass, soojuspump W35 A+++
Energiaklass, soojuspump W55 A++
Energiaklass, kombineeritud süsteem W35 A+++
Energiaklass, kombineeritud süsteem W55 A++
Küttevõimsus A7/W35 (EN 14511) 4,86 kW
Küttevõimsus A2/W35 (EN 14511) 5,30 kW
Küttevõimsus A-7/W35 (EN 14511) 6,00 kW
Maksimaalne jahutusvõimsus A35/W7 5,00 kW
Jahutusvõimsus A35/W18 (osalisel koormusel) 2,50 kW
Maksimaalne jahutusvõimsus A35/W18 5,00 kW
COP näitaja A7/W35 (EN 14511) 4,76
COP näitaja A2/W35 (EN 14511) 3,80
COP näitaja A-7/W35 (EN 14511) 2,98
Maksimaalne energiatõhususe näitaja A35/W7 1,73
Energiatõhususe näitaja osalisel koormusel A35/W18 3,28
Maksimaalne energiatõhususe näitaja A35/W18 2,88
SCOP (EN14825) 4,50
Müravõimsuse tase (EN 12102) 57 dB(A)
Min/max töötamise temperatuur (õhk) -20…40 °C
Kütte maksimaalne töötamise temperatuur 60 °C
Kõrgus 812 mm
Laius 1152 mm
Sügavus 524 mm
Kaal 91 kg
Pinge 230V
Külmaine R410A