Description
The boiler design is well thought out. Wood is loaded into the boiler through the middle door. In the upper part of the boiler, the flue passages are equipped with flame tubes, which gives the boiler high efficiency while also ensuring easy cleaning. The rear section of the lower part of the boiler is intended for pellet combustion. Pellet feeding into the boiler’s combustion bowl is carried out by means of an auger located in the lower part of the container. The primary air fan supplies the amount of air required for the pellet combustion process. The boiler is equipped with a flue gas fan.
The boiler is insulated with mineral wool and covered with heat-resistant powder coating. The maximum boiler pressure is 2.5 bar and the maximum operating temperature is 90C. Reflectors are installed in the rear of the boiler to increase combustion efficiency. By adding turbulators to the boiler’s flame tubes, it is possible to increase the boiler efficiency by 7-10%. It is mandatory to use a safety valve with a pressure of 2.5 bar when connecting the boiler.
| BOILER MODEL | Šukoplam VENT 25 | Šukoplam VENT 30 | Šukoplam VENT 50 | Šukoplam VENT 80 |
| Nominal power kW | 24-32 | 30-43 | 40-60 | 65-90 |
| Min. power | 24 | 30 | 40 | 65 |
| A1 (mm) | 400 | 470 | 500 | 530 |
| B1 (mm) | 550 | 705 | 830 | 865 |
| A (mm) | 1355 | 1440 | 1470 | 1485 |
| B (mm) | 1177 | 1295 | 1415 | 1525 |
| C (mm) | 1340 | 1360 | 1360 | 1450 |
| E (mm) | 1006 | 1097 | 1097 | 1175 |
| F/F1 (mm) | 170 | 170 | 170 | 165 |
| G (mm) | 840 | 915 | 915 | 995 |
| Water volume (l) | 160 | 180 | 240 | 280 |
| Weight (kg) | 460 | 520 | 600 | 700 |
| Flue gas temp. (C) | 230 | 230 | 230 | 230 |
| Operating pressure (bar) | 2,5 | 2,5 | 2,5 | 2,5 |
| Flue pipe diameter (mm) | 160 | 160 | 180 | 200 |
| Hot/cold connection ‘’ | 1 ¼ vk | 1 ¼ vk | 1 ¼ vk | 1 ½ vk |
| Safety valve connection ‘’ | 1 vk | 1 vk | 1 vk | 1 vk |
| Fill/drain connection ‘’ | ½ sk | ½ sk | ½ sk | ½ sk |
| Pellet container (kg) | 165 | 165 | 165 | 165 |
