Description
The boiler design is very well thought out. Wood is loaded into the boiler through the middle door. The upper part of the boiler contains flue gas passages with flame tubes, which gives the boiler high efficiency while also ensuring easy cleaning. The rear section of the lower part of the boiler is designed for pellet combustion. Pellets are fed into the boiler’s combustion cup by means of a conveyor screw located at the bottom of the hopper. The primary air fan supplies the amount of air required for the pellet combustion process. The boiler is equipped with a flue gas fan.
The boiler is insulated with mineral wool and coated with heat-resistant powder paint. The maximum boiler pressure is 2.5 bar and the maximum operating temperature is 90C. Reflectors are installed in the rear of the boiler to increase combustion efficiency. By adding turbulators to the boiler’s flame tubes, it is possible to increase the boiler efficiency by 7-10%. It is mandatory to use a safety valve with a pressure of 2.5 bar when connecting the boiler.
| BOILER MODEL | Šukoplam VENT 25 | Šukoplam VENT 30 | Šukoplam VENT 50 | Šukoplam VENT 80 |
| Nominal power kW | 24-32 | 30-43 | 40-60 | 65-90 |
| Min. power | 24 | 30 | 40 | 65 |
| A1 (mm) | 400 | 470 | 500 | 530 |
| B1 (mm) | 550 | 705 | 830 | 865 |
| A (mm) | 1355 | 1440 | 1470 | 1485 |
| B (mm) | 1177 | 1295 | 1415 | 1525 |
| C (mm) | 1340 | 1360 | 1360 | 1450 |
| E (mm) | 1006 | 1097 | 1097 | 1175 |
| F/F1 (mm) | 170 | 170 | 170 | 165 |
| G (mm) | 840 | 915 | 915 | 995 |
| Water volume (l) | 160 | 180 | 240 | 280 |
| Weight (kg) | 460 | 520 | 600 | 700 |
| Flue gas temp. (C) | 230 | 230 | 230 | 230 |
| Operating pressure (bar) | 2,5 | 2,5 | 2,5 | 2,5 |
| Flue pipe diameter (mm) | 160 | 160 | 180 | 200 |
| Hot/cold connection ‘’ | 1 ¼ vk | 1 ¼ vk | 1 ¼ vk | 1 ½ vk |
| Safety valve connection ‘’ | 1 vk | 1 vk | 1 vk | 1 vk |
| Filling/draining connection ‘’ | ½ sk | ½ sk | ½ sk | ½ sk |
| Pellet hopper (kg) | 165 | 165 | 165 | 165 |
