Atmos A25 SP Pellet Burner (5-30 kW)

Product code: 101A25SP

1 843,00

ESTO 3
ESTO järelmaks

The Atmos A25 SP pellet burner operates fully automatically. The pellet burner is equipped with two pellet ignition mechanisms. All operating modes are handled by the burner’s electronic controller.

 

The screw conveyor and water temperature sensor are not included. If the burner is installed in front of a standard wood boiler, the water temperature sensor must be added. If it is an Atmos boiler with a pellet opening, the sensor is already in the boiler.

 

The Atmos A25 SP pellet burner is suitable for Atmos boilers DC18SP, DC25SP, DC30SPX and DC32SP.

 

  • The ignition mechanisms always guarantee fuel ignition
  • The burner is equipped with overheating protection
  • The burner operating cycles are controlled by a photosensor (light-sensitive device) in the burner control system circuit
  • The burner operating cycles can be monitored on the burner display
  • Unlike the Atmos A25 burner, the A25 SP burner has a corresponding valve, controlled by a servomotor, which closes or opens the air passing through the burner via the wood or pellets.

 

 

619,80
29,80
805,00

Description

Power supply: 230 V / 50 Hz
Maximum power consumption at startup with one ignition element: 522 W – standard setting
Maximum power consumption at startup with two ignition elements: 1042 W – special functions
Average power consumption at nominal heat load: 42 W
Average power consumption at minimum heat load: 22 W
Average power consumption in standby mode: 3.3 W
Fuse rating for burner and boiler: 6.3 A
Noise level: 54 dB
Burner weight: 15 kg (17 kg A25SP)
Burner dimensions, W x H x D: 25 x 47 x 55 cm

General
Manufacturer Atmos
Weight (kg) 17
Measurements
Height (mm) 470
Width (mm) 250
Depth (mm) 550
Power/currents
Power (kW) 5-30
Protection (A) 6,3
Voltage (V) 230/50 Hz