Description
The rotating combustion chamber of the automatic Venma COMFORT S series pellet burner prevents the accumulation of combustion residues in the combustion chamber during burner operation, because the combustion chamber rotates while the burner is operating, as a result of which the pellet ash is removed from the combustion chamber on its own.
The Venma COMFORT S series pellet burner can be installed on various types of boilers – solid fuel, pellet, gas, and oil boilers. For this purpose, the combustion chambers of these boilers must be sufficiently large to provide space for the ash generated during pellet combustion.
With protective automation, the burner stops fuel supply in the event of overheating or a flame fault. In the event of a power failure, the fuel supply stops automatically, preventing damage to the burner and other equipment. After a power outage, the burner starts automatically.
The pellet burner is equipped with an Estonian-language ST-976K touchscreen control unit, which allows operating mode/parameter changes, and the automation can be connected to a room temperature sensor and an outdoor air temperature sensor. The control unit also allows control of the heating and domestic hot water pumps and the mixing unit.
With the RS WiFi module (available as an add-on), it is possible to monitor and adjust burner operation over the internet via remote service.
A good overview of the burner operating principle is provided by the introductory video below:
