Description
The rotating combustion chamber of the automatic Venma COMFORT S-series pellet burner prevents combustion residues from accumulating in the combustion chamber during burner operation, as the combustion chamber rotates while the burner is running, as a result of which the pellet ash is removed from the combustion chamber on its own.
The Venma COMFORT S-series pellet burner can be installed on various types of boilers – solid fuel, pellet, gas, and oil boilers. For this purpose, the combustion chambers of these boilers must be large enough to allow space for the ash generated during pellet combustion.
With protection automation, the burner stops the fuel feed in the event of overheating or a flame fault. In the event of a power outage, the fuel feed stops automatically, preventing damage to the burner and other equipment. After the power returns, the burner starts automatically.
The pellet burner is equipped with the ST-976K control unit with a touchscreen in Estonian, which allows changing operating mode/parameters, and the automation can be connected to a room temperature sensor and an outdoor air temperature sensor. The control unit also allows controlling the operation of heating and domestic hot water pumps and the mixing unit.
With the RS WiFi module (available as an extra), it is possible to monitor and configure the burner operation over the internet via remote service.
The accompanying introductory video provides a good overview of the burner’s operating principle:
