Description
The rotating combustion chamber of the automatic Venma COMFORT S series pellet burner prevents the accumulation of combustion residues in the combustion chamber during operation, because the combustion chamber rotates while the burner is running, as a result of which the pellet ash is removed from the combustion chamber on its own.
The Venma COMFORT S series pellet burner can be installed on various types of boilers – solid fuel, pellet, gas and oil boilers. For this, the combustion chambers of the boilers in question must be sufficiently large to provide space for the ash generated during pellet combustion.
With safety automation, the burner stops fuel supply in the event of overheating or a flame fault. In the event of a power failure, the fuel supply stops automatically, which prevents damage to the burner and other equipment. After a power outage, the burner starts automatically.
The pellet burner is equipped with the ST-976K control unit with an Estonian-language touch screen, which allows changing operating modes/parameters, and the automation can be connected to a room temperature sensor and an outdoor air temperature sensor. The control unit also allows control of the operation of heating and domestic hot water pumps and the mixing unit.
With the RS WiFi module (available as an extra), it is possible to monitor and configure the burner over the internet via remote service.
The accompanying introductory video gives a good overview of the burner’s operating principle:
