Atmos A45 SP Pellet Burner (8.5–49 kW)
Atmos A45 SP Pellet Burner (8.5–49 kW) - Image 2

Atmos A45 SP Pellet Burner (8.5–49 kW)

Product code: 101A45-1

2 379,00€

ESTO 3
ESTO järelmaks

The Atmos A45 SP pellet burner operates fully automatically. The pellet burner is equipped with two pellet ignition mechanisms. All operating modes are controlled by the burner’s electronic controller.

 

The auger conveyor and water temperature sensor are not included. If the burner is installed in front of a standard wood boiler, the water temperature sensor must be added. If it is an Atmos pellet-ready boiler, the sensor is already in the boiler.

 

  • The Atmos A45 SP is suitable for the Atmos DC-40SPT boiler
  • Unlike the Atmos A45 burner, the A45 SP burner has a corresponding valve controlled by a servo motor, which closes or opens the air passing through the burner through the wood or pellet.

 

SKU: 101A45-1 Categories: , , , Tag:

Description

Power supply: 230 V / 50 Hz
Maximum power consumption on startup with one ignition element: 480 W – standard setting
Maximum power consumption on startup with two ignition elements: 1042 W – special functions
Average power consumption at rated heat load: 47 W
Average power consumption at minimum heat load: 29 W
Average power consumption in standby mode: 3.3 W
Burner and boiler prescribed fuse protection: 6.3 A
Noise level: 47 dB
Burner weight: 26 kg
Burner dimensions, W x H x D: 31 x 52 x 76 cm

Atmos-A45-SP-poleti-juhend-ENG.pdf

General
Manufacturer Atmos
Weight (kg) 26
Noise level (dB) 47
Measurements
Height (mm) 520
Width (mm) 310
Depth (mm) 760
Power/currents
Power (kW) 8,5-49
Maximum output current (A) 6.3
Voltage (V) 230 V / 50 Hz