Domestic Water Circulation Pump Evoplus 110/180 SAN DAB
871,00€
Wet-rotor circulation pump with a bronze housing, designed for domestic hot water circulation in small households, residential, civil, and commercial buildings.
It is equipped with an integrated variable-frequency drive to ensure better overall performance and energy efficiency and to protect the system from hydraulic shocks. Operating parameters such as proportional or constant differential pressure and constant speed can be easily viewed and set on the user-friendly display.
Synchronous motor with permanent magnet rotor. Flanged inlet and outlet ports.
WRAS and ACS certified. Remote control possible with DConnect service, DConnect Box supplied separately.
Flow rate (range): 7.2 m³/h
Head: Up to 11.1 m
Type of pumped liquid: clean, free of solids and mineral oils, non-viscous, chemically neutral
Liquid temperature (range): From -10 °C to +110 °C
Operating pressure (maximum): 16 bar / 1600 kPa
Flanged or threaded connection: Thread 1″ 1/2
Motor protection class: IP 44
Motor insulation class: F
Impeller material: Technopolymer
Single-phase supply voltage: 230 V 50 Hz
Installation type: Fixed with horizontal motor shaft
Certification: WRAS, ACS

| General | |
|---|---|
| Manufacturer | DAB |
| Productivity (m³/h) | 7,2 |
| Weight (kg) | 4,5 |
| Thread (") | 1 1/2 |
| Lifting height (m) | 11,1 |
| Measurements | |
|---|---|
| Width (mm) | 180 |
| Power/currents | |
|---|---|
| Voltage (V) | 230 |
| Volumes/pressures | |
|---|---|
| Maximum operating pressure (bar) | 16 |
| Max. liquid temperature (°C) | 110 |



