Description
Flooré underfloor heating solution is based on thin high-density polystyrene (EPS-300) boards that are fully covered with aluminium foil. This construction makes it possible to install the floor surface material directly onto the boards. Flooré boards distribute heat faster and more efficiently than traditional, material-intensive solutions thanks to the aluminium foil covering, the shorter distance between the pipe and the floor surface, and the lower thermal mass.
Underfloor heating with Flooré boards is suitable for installation on most existing surfaces without expensive and time-consuming casting work, where the floor would also have to dry for a long time before it can be used. You can also install a new floor with heating on top of an old floor.
The floor under the underfloor heating must be level, stable, and load-bearing. All floor covering materials are suitable for installation on top of the underfloor heating base board. A wood, parquet, or laminate floor can be installed floating. Stone, clinker, or ceramic floor tiles are installed directly on Flooré underfloor heating. The tiles must be at least 15×15 cm. In wet rooms, the Flooré base boards are smoothed with filler and covered with a moisture-resistant layer before installing the floor tiles.
The Flooré underfloor heating base board is a patented Swedish product. It is a successful successor to the previous-generation board, developed together with the Royal Institute of Technology (KTH, Stockholm) as early as 1991.
