Description
The integrated convection fan distributes warm air throughout the house. The best result is achieved when the pellet stove is located in the middle part of the lower floor of the house. The room temperature can be easily set on the control panel. When using the thermostat, the pellet stove ignites and extinguishes automatically when the set temperature has been reached. To fill the stove with pellets, the hatch beneath the stove’s top panel must be opened. Thanks to the large hopper, the stove needs to be refilled only rarely.
The filler device hatches and the door have safety switches. Together with the switches, two safety thermostats are installed in the safety coil to prevent overheating and flame blowback.
NB! If your home does not have a chimney, the Lilla Frö stove can also be installed without one. This is made possible by the “Arrow” solution, a fan-assisted exhaust flue that is routed out through the wall. That is why KMP stoves are called chimneyless stoves.
Description of the “Arrow” solution:
The system’s operation is based on the fact that the built-in fan creates negative pressure in the casing depending on how much air is needed for combustion. The hot flue gases drawn out of the combustion chamber through the convection pipes and flue gas pipe are mixed with outside air entering through the openings in the sides of the casing. In this way, the mixed flue gases cool to an extremely low temperature before being released into the open air. The controlled combustion of the pellet stove produces very little visible or noticeable smoke. Smoke can be seen and smelled during start-up and shut-down for a very limited time (usually less than 1 min). To prevent smoke from entering the room, the wall fan should be positioned away from fresh air inlets, doors, or openable windows (the exact minimum distances are specified in the operating and installation manual).
Manufacturer: KMP Pellet Heating AB, Sweden
